Choosing a China Stainless Steel Window Screen Mesh Manufacturer: Application Fit and Specification Checks

23 October 2026

Hebei Jiushen Wire Weaving Co., Ltd.JOURNAL / THE BUYER'S GUIDE / SELECTION

THE BUYER'S GUIDE / SELECTION

Choosing a China Stainless Steel Window Screen Mesh Manufacturer: Application Fit and Specification Checks

A buyer-focused guide to selecting stainless steel window screen mesh from a China stainless steel window screen mesh manufacturer. It explains how to match the material grade (SS304, SS304L, SS316, SS316L), mesh count and wire diameter, roll size, colour and finish, and specialty types to the project. It also shows when a flame-retardant screen or an industrial stainless steel wire mesh fits better, and which documents to request before ordering. Pricing, lead times and certifications are not covered and need to be confirmed with the supplier.

AI illustration: Choosing a China Stainless Steel Window Screen Mesh Manufacturer: Application Fit and Specification Checks
AI-generated illustration; not a real product photograph, specification, operating permission or test certificate.
01

Application and environment: residential or commercial window, door and porch screening, filter support layer, or agricultural protection; coastal or humid exposure

02

Material grade: SS304, SS304L, SS316 or SS316L, stated explicitly in the enquiry, with material documents requested

03

Mesh count and wire diameter: standard 16x16 (0.30 mm), 18x18 (0.23 mm), 22x22 (0.18 mm); plain or cross weave; square or round openings; mesh size adjustable

04

Roll dimensions: widths 610-1830 mm and lengths 2-150 m, both customizable, matched to frame sizes

05

Colour and finish: silver, black or gray (customizable) with electrostatic coating

06

Specialty type: heavy duty or high tensile strength where security matters

07

Quality and compliance: published inspection and flatness controls, a defect limit of no more than 1 per 30 m², and listed ASTM B117-09, ASTM E2016-15 and Q/EQl-40-2007 references, with the applicable reports requested

08

Exclusions: a flame-retardant requirement points to the flame-retardant screen; process filtration points to industrial stainless steel wire mesh

Choosing a China Stainless Steel Window Screen Mesh Manufacturer: Application Fit and Specification Checks

When you look for a China stainless steel window screen mesh manufacturer, it is easy to compare offers mainly on price per roll. A better approach is to define the application first and then check that each specification fits it. This guide covers the specifications that Hebei Jiushen Wire Weaving Co., Ltd. publishes for its stainless steel window screen range. It also explains when a different product in the range is the better choice.

Step 1: Define the application before the mesh

The published product information describes several uses for stainless steel window screen mesh:

  • Residential windows, doors and porches, for insect protection with airflow and outward visibility
  • Commercial porches and window screen projects for building contractors, window and door manufacturers, property managers and real estate developers
  • Support layers for filters in industrial filter assemblies
  • Agricultural uses, such as epidemic prevention on livestock farms and orchard planting protection

Write down the main job of the screen (insect barrier, security layer, filter support or agricultural protection), the installation environment (for example coastal, humid or inland) and the frame system it will go into. These three answers drive every choice below.

Step 2: Choose the stainless steel grade

The stainless steel window screen is listed in SS304, SS304L, SS316 and SS316L. The supplier says the mesh resists rust and corrosion, including in coastal climates and heavy rain. It also says the stainless steel can be used with pressure-treated lumber.

Practical guidance:

  • 304 / 304L is the standard choice in the published range for general window and door screening.
  • 316 / 316L is also offered. Buyers looking for a 316 stainless steel mesh screen for coastal or more corrosive sites should name 316/316L clearly in the enquiry. They should also ask for material documentation for the order, rather than assume a grade from the product name.

Step 3: Check mesh count and wire diameter

The standard window screen specifications listed are:

Mesh count Wire diameter
16x16 0.30 mm
18x18 0.23 mm
22x22 0.18 mm

The weaving pattern is plain weave or cross weave, with square or round openings. As a general rule, a higher mesh count gives smaller openings for finer insect exclusion. A thicker wire adds mechanical strength. Balance the two against the airflow and visibility your project needs. If none of the standard specifications fits, the supplier says mesh size can be adjusted.

Step 4: Confirm roll dimensions, colour and finish

  • Widths: 610 mm to 1830 mm (customizable)
  • Lengths: 2 m to 150 m (customizable)
  • Colours: silver, black, gray (customizable)
  • Surface finish: eco-friendly electrostatic coating, which the supplier says helps prevent fading and makes cleaning easier

Match the roll width to your frame or panel sizes to reduce offcut waste, and agree the colour on a physical sample if appearance matters for the project.

Step 5: Decide whether you need a specialty type

The range includes heavy duty and high tensile strength types. The supplier describes stainless steel screens as tougher than fiber screens and suitable as a security layer against intruders and large pests. They are also said to resist sagging and shape loss over time. If security is a main requirement, say so in the enquiry so the right specialty type and wire size can be proposed. The source does not give impact or tensile test values, so request data if your project needs them.

Step 6: Review quality controls and compliance claims

The product page lists the following quality controls:

  • 100% inspection of semi-finished and finished products
  • Weaving and leveling processes to prevent bubbling or arching
  • Coating controls for uniform surface colour
  • A defect standard of no more than 1 defect per 30 m²

The page also lists ASTM B117-09, ASTM E2016-15 and Q/EQl-40-2007 under compliance. Treat these as the supplier's published references. Ask for the test reports or documents that apply to your grade and specification before you rely on them in a tender.

When this product is not the right fit

A standard stainless steel window screen is not the best choice for every project:

  • Flame-retardant requirements: if the project needs a flame-retardant screen, look at the [High Visibility Flame-Retardant Stainless Steel Window Screen] range instead. It is offered in SS304 and SS316, plain weave with rough selvedge, in black, white or gray. The supplier says its flame-retardant screens have passed industry-standard flame retardant testing. The specific standard is not named in the source material, so ask for the test report and standard reference.
  • Process filtration: for gas, liquid or solid filtration in chemical, petroleum, food or medicine industries, an industrial stainless steel wire mesh is more appropriate than a window screen. That range covers plain, twill, dutch, herringbone and five-heddle weaves in 304, 304L, 316, 316L and 310, from 1x1 up to more than 100x100 mesh. It references ASTM E2016 and ASTM E2814. A window screen can act as a filter support layer, but it is not a replacement for a specified filtration cloth.

Information to send with your enquiry

To get a quotation you can compare, give:

  1. Application and installation environment
  2. Required grade (SS304, SS304L, SS316 or SS316L)
  3. Mesh count and wire diameter, or the performance goal if you are unsure
  4. Roll width, length and quantity
  5. Colour and finish
  6. Any specialty need (heavy duty, high tensile, flame retardant)
  7. Documents you need, such as material certificates or test reports

Price, lead time and certification status are not covered in this guide. Confirm them directly with Hebei Jiushen Wire Weaving Co., Ltd. for your order.

THE COMPANY

Hebei Jiushen Wire Weaving Co., Ltd.

Covering an area of 20,000 square meters, Hebei Jiushen Wire Weaving Co., Ltd. is located in Anping County, where is 200km away from Shijiazhuang International Airport and Tianjin port with superior concentrated industry & convenient transportation. Having nearly 100 sets of manufacturing equipment mainly imported weaving looms, Jiushen has the leading weaving technology and equipment upgrading ability in wire mesh industry.…

About Us ↗Visit company website ↗

YOUR NEXT STEP

Bring your brief. Start a useful conversation.

Use case, specification, quantity and delivery window: make the next conversation specific.

If you are interested in our products, you can choose to leave your information here, and we will be in touch with you shortly.